來源：http://www.railway-signal.com/ 發布時間：2021-08-23 瀏覽次數：
Automatic spot welder in the automatic welder system, in order to improve the welding efficiency, it is often necessary to make multi station automatic welding, mainly including loading position, clamping position, welding position, cooling position or detection position and blanking position, so as to form a complete set of automatic system.
Complete the work of workpiece from assembly, welding and output detection at one time. There are loading and unloading positions, welding positions and detection positions. In the automatic welding machine system composed of welding robot, double station or multi station welding is often used. Within the coverage of the long arm of the robot, it can be converted from one station to another, so as to realize multi station welding.
The welding of parts often includes one or more welds, and often includes the assembly and welding of multiple parts into one part. For example, our commonly used water heater liner, automobile air storage cylinder, etc., including the straight seam welding after the steel plate is rolled, and the circumferential seam welding between the head at both ends and the cylinder.
The water outlet nozzle or air outlet nozzle is welded with the circumferential seam of the cylinder or end cover, the hanging frame of the inner tank or cylinder is welded, and the assembly welding is completed into one part, that is, the inner tank or air storage cylinder of the water heater. To realize the automatic completion of each welding mode, it is necessary to automatically switch from one station to another, so as to form a flow production operation and realize automatic welding.
The above content is the relevant content introduced by Xiaobian. I hope it can help you. More wonderful content can be directly concerned http://www.railway-signal.com