<rp id="jcirx"></rp>
    <font id="jcirx"><tr id="jcirx"></tr></font>

    <rt id="jcirx"><meter id="jcirx"></meter></rt>
    <rp id="jcirx"><meter id="jcirx"><button id="jcirx"></button></meter></rp>

      泰安揚帆數控科技有限公司為您提供焊接機器人等相關信息發布和資訊展示,敬請關注!
      咨詢服務熱線:
      0538-5358300

      新聞資訊

      推薦產品

      公司新聞

      焊接機器人不同槍姿對焊接造成的影響

      來源:http://www.railway-signal.com/  發布時間:2021-07-30 瀏覽次數:

      焊接機器人不同槍姿對焊接造成的影響一個熟練的焊工焊出的品質和外觀比一個新焊工要好許多,主要是熟練的焊工通過日集月累的經驗知道焊一個產品需要多大電流、電壓、速度多快、還有一個更重要的就是焊接的姿勢和方法。因為電流和速度可以直觀的看到,但一個合適的姿勢就需要有一個長期的經驗來決定。

      The influence of different gun positions of welding robot on welding. The quality and appearance of a skilled welder are much better than that of a new welder. It is mainly because the skilled welder knows how much current, voltage and speed it needs to weld a product through the accumulated experience of days and months. Another more important thing is the welding posture and method. Because the current and speed can be seen intuitively, but a suitable posture needs a long-term experience to decide.
      焊接機器人也是一樣,不同的焊接姿勢(槍姿)對焊接成形的外觀也是一個決定性的因素。環縫焊接專機
      The same is true for welding robots. Different welding posture (gun posture) is also a decisive factor for the appearance of welding forming. Girth welding machine
      像亞倫達機器人我們一般要求焊槍與焊接平面保持45°~60°左右,與焊縫那條線也保持在45°~60°左右。但前提讓焊槍避開焊接的產品和定位工裝。焊接姿勢不好會對焊接品質造成影響主要是因為兩個方面:一是氣體保護不好,二是送絲不暢。槍姿不合適會導致氣體保護不好,焊接會出現氣孔現象;槍姿不合適也會讓同軸電纜里的送絲太過彎曲而送絲不暢,會出現焊縫不均勻,斷斷續續的現象。如果在焊接過程中出現上述現象,槍姿雖然不是唯一的因素,但也是需要排查的重點之一。
      Like the arenda robot, we generally require the welding gun to maintain about 45 ° ~ 60 ° with the welding plane, and the line with the weld is also maintained at about 45 ° ~ 60 °. However, the premise is to let the welding gun avoid the welded products and positioning tooling. Poor welding posture will affect the welding quality mainly because of two aspects: one is poor gas protection and the other is poor wire feeding. Improper gun posture will lead to poor gas protection and porosity in welding; Improper gun posture will also make the wire feeding in the coaxial cable too bent and poor wire feeding, resulting in uneven and intermittent welds. If the above phenomena occur in the welding process, although the gun posture is not the only factor, it is also one of the key points to be investigated.

      上一篇:焊接變位機焊條的這些知識你知道多少?
      下一篇:直縫自動焊接機是自動焊接機的一種,針對直線焊縫自動化

      欧美大胆无码视频